Last Updated on by
Whether you are looking for a better way to heat your home with smaller systems, or are just looking for better style, baseboard heaters are the way to go. With that being said, there are a lot of baseboard heaters available on the market today.
Baseboard heaters are great because they can be used to heat a whole house or to heat an individual room. That is up to you to decide. However, they also can be used in commercial spaces as well. The ones used in bigger places for commercial use are specialized boards that are made special for that place.
It may be confusing for you to find the best baseboard heaters for your home. That is why we are here to help you find the right one. We have a whole list of baseboard heaters with baseboard heater reviews so that you know which one is the best for you. No need for you to keep searching, we have done it all for you!
- 1 Electric Baseboard Heater Reviews
- 1.1 White Baseboard Electric Zone Hardwire Heater – Cadet Manufacturing- 120v Baseboard Heater
- 1.2 Hardwire Electric Baseboard Heater- White – Cadet Manufacturing
- 1.3 120- Volt Hardwire Electric Baseboard Heater – Cadet Manufacturing
- 1.4 4-Foot Baseboard Heater – King – K Series
- 1.5 30- Inch Convection Heater w/ Thermostat & Digital Display – Optimus
- 1.6 North America Wireless Heater by Dimplex
- 2 Electric Baseboard Heater Comparison Chart
- 3 Electric Baseboard Heater Buying Guide
- 3.1 What is a Baseboard Heater?
- 3.2 How do Baseboard Heaters Work?
- 3.3 How to Properly Use a Baseboard Heater/Troubleshooting Options
- 3.4 Tips to Remember
- 3.5 Where did Baseboard Heaters Originate?
- 3.6 Pros/Cons of Electric Keyboards
- 3.7 Pros/Cons of Hot Water Baseboard Heaters
- 3.8 Alternatives
- 3.9 How to Remove Baseboard Heaters
- 3.10 Safety Information
- 4 Conclusion
Electric Baseboard Heater Reviews
- Cadet Manufacturing 05532
- Voltage: 120-Volt
- Wattage: 750-Watt
- Dimensions: 36 x 6 x 14 inches
- Weight: 6.8 pounds
- Warranty: Manufacturers
- Cadet Manufacturing 09956
- Voltage: 240-Volt
- Wattage: 1500-Watt
- Dimensions: 4 x 72.3 x 7 inches
- Weight: 13.3 pounds
- Warranty: Manufacturers
- Cadet Manufacturing 05534
- Voltage: 120-Volt
- Wattage: 1000 W
- Dimensions: 48 x 6 x 14 in
- Weight: 8 pounds
- Warranty: Manufacturers
- KING 4K2407BW K Series
- Voltage: 277-240 V
- Wattage: 1000-750W
- Dimensions: 48 x 3.13 x 6.75 in
- Weight: 10.25 pounds
- Warranty: 1 Year Warranty
- Optimus H-3603
- Voltage: N/A
- Wattage: 750 and 1500 -Watt
- Dimensions: 30 x 6 x 9.5 in
- Weight: 6 pounds
- Warranty: Manufacturers
- DIMPLEX North America PC6025W31
- Voltage: 240V
- Wattage: 2500W
- Dimensions: 60 x 2.4 x 6.6 in
- Weight: 12 pounds
- Warranty: 10 year
White Baseboard Electric Zone Hardwire Heater – Cadet Manufacturing- 120v Baseboard Heater
This model will require you to purchase a baseboard heater thermostat and wire it to the unit yourself. However, that is not a bad option when you are looking at the overall picture. This model is made of strong steel. It features 25-gauge steel. The model also features a junction box which is twenty-gauge. The junction box is all metal and is powder-coated. It has a ground inside as well.
This model is very simple to install and it gets the job done. It heats rooms very well and you do not have to fix it to a wall. If you would like you can simply place it against your wall. We do recommend that you do fix or mount it to your wall for safety reasons.
It suits areas best that are over 36 inches. This model requires at least a space of 36 inches to be installed. You should also have a foot around the whole heater to ensure that there are no fire hazards. It is 750-watts and it is 6.25 Amp.
This model works great for rooms that are no larger than ten feet by ten feet. It can heat rooms this size very well. If you put it in a larger room it may cause your room not to get as warm as you would like.
• High-Temp Shutoff
• Pre-Punched Holes – Easier Installation
• Ability to be Wired at Either End
• Noise Reduction- Nylon Bushings
• Steel Heating Element Featuring Aluminum Fins
Hardwire Electric Baseboard Heater- White – Cadet Manufacturing
This is an electric baseboard heater that features 72-inches of length and 240 volts. It is a heater that will continue to transmit heat throughout the day and night. It is made in the United States. It is made of 25-gauge steel.
It features a junction box that has a ground. The junction box is made of all metal and features a powder coating. The heater will require you to purchase a thermostat. It is very simple to wire a thermostat to your baseboard heater.
You will need to have at least 72-inches of space for this heater. This heater is not a plug-in heater and you would need to wire it for it to work. Keep in mind, you should allow a foot around the heater on all sides for you to avoid fire hazards.
This heater works well in larger rooms. It can heat a 12 foot by thirty-foot room easily. It is great for living rooms and other larger rooms in the house. If you were to put this in a smaller room it may be too warm for that particular space.
• Pre-Punched Holes for Easy Installation
• Can be Wired from Either End
• High-Temp Automatic Shutoff
• Nylon Bushings for Noise Reduction
• Aluminum Fins
• Steel Heating Element
120- Volt Hardwire Electric Baseboard Heater – Cadet Manufacturing
This is a 120-volt heater that is also 1000 watts. It is 48 inches in length. Cadet Manufacturing has different models and sizes and is one of the most popular baseboard heater manufacturers.
This unit is very quiet and provides convection heat. They are easy to install and will work for many years. This unit will work best when it is under a window. It should be about a foot away from any other objects. Also, keep in mind that you should not hang anything close to the unit either. It should also not be installed below any outlets.
Cadet Manufacturing units require you to purchase a thermostat. You can purchase a thermostat through Cadet if you would like to. You can mount this unit to the wall or simply place it on the floor.
It features a 20-gauge junction box. This box is made of metal and is powder-coated to help it last longer. It has a ground wire in the junction box as well. The unit itself is made of 25-gauge steel.
The powder coating protects against scratching and nicks so that your unit stays looking newer for longer. This unit is also very light and easy to install. All Cadet baseboard heaters are fairly light and easy to install.
• Aluminum Fins
• Steel Heating Elements
• Option to Wire from Either End
• Noise Reduction ft. Nylon Bushings
• Automatic Shutoff with High Temps
• Easy Installation with Pre-Punched Holes
4-Foot Baseboard Heater – King – K Series
The King K-Series has a low installation cost and has a modern design for construction. It is very quiet and makes it a great option for both living spaces and bedrooms. It is 227 volts and 1000 watts to provide enough heat to the room you need it in.
This model can be wired at one end or the other and it is made of a crush-proof material. Aluminum is the best material for being crush-proof. You should install this under windows for the best results. It is an American-made product.
It uses quality materials to provide you peace of mind from damage. It is crush-proof and dent resistant. It is also made of tough and durable steel to make it strong.
You will need to purchase a thermostat for this baseboard heater. You can either wire this from an existing wire from your thermostat or purchase a separate one and mount it to the unit itself.
• Safety Cutout- Full Length
• High-Temp Safety Shutoff
• Zone Heating
30- Inch Convection Heater w/ Thermostat & Digital Display – Optimus
This is a baseboard heater with a thermostat. It has a thermostat internally which limits the heat. This also features an overheating alert and even a safety switch if the unit tips over. The Optimus heater has an automatic control over the thermostat as well.
It features two separate heat settings of 750 watts and 1500 watts. This allows you to adjust your heating to your preference. This is a convection heater. It has different settings to allow you to adjust it to your preference. It has an off switch and a high and low switch.
To make it easier to haul, it has a carrying handle that is already built-in. It is also a durable unit which is made of sheet metal. It is a very quiet unite as well. It can be used nicely in bedrooms, bathrooms, and other small areas.
• Power-On Indicator
• Internal Heating Thermostat with Limiting
• Hi/Low Setting
• 1500 & 750 Watt Settings
• Carrying Handle
North America Wireless Heater by Dimplex
This is a wireless baseboard heater and it is extremely energy efficient. It has a built-in thermostat. The thermostat is electric. It has optimal energy-efficient features to provide you with savings. This unit is compatible with most wireless control temperatures or even wall controllers. It provides you with over 33 percent more energy savings than most baseboard heaters. The thermostat is high-efficiency.
The unit itself is formulated with special polyester and epoxy coating. This makes it friendly for the environment and it resists fading for longer. It is very easy to install. It provides easier temperature control. It is a durable product that will last for years.
It is shorter than most baseboard heaters which make it better for maximizing your floor plan and this means it is better for more modern homes. It has a sleek design which makes it nice for bedrooms, bathrooms, and all the other rooms in your home.
• Energy Efficient
• Built-in Thermostat
• Electric Baseboard Heater Thermostat
• Plug-In Baseboard Heater
Electric Baseboard Heater Comparison Chart
|Cadet Manufacturing 05532||120-Volt||750-Watt||36 x 6 x 14 in||6.8 pounds|
|Cadet Manufacturing 09956||240-Volt||1500-Watt||4 x 72.3 x 7 in||13.3 pounds|
|Cadet Manufacturing 05534||120-Volt||1000 W||48 x 6 x 14 in||8 pounds|
|KING 4K2407BW K Series||277-240 V||1000-750W||48 x 3.13 x 6.75 in||10.25 pounds|
|Optimus H-3603||N/A||750 and 1500 -Watt||30 x 6 x 9.5 in||6 pounds|
|DIMPLEX North America PC6025W31||240V||2500W||60 x 2.4 x 6.6 in||12 pounds|
Electric Baseboard Heater Buying Guide
By now, you should hopefully have an idea of what a baseboard heater is. If not, there is nothing to stress about! We are here to inform you of a lot of different things. We are going to talk about what a baseboard heater is and what different types you can purchase. This buying guide will provide you with all the information you may need to know before purchasing a baseboard heater for your home.
What is a Baseboard Heater?
A baseboard heater will refer to two different kinds of heating systems. There is electric baseboard heaters and hot water baseboard heaters. Electric baseboard heaters are for those who have individual units and heat their house by each room. These are the less efficient of the two units. It is also less efficient than central heating units or systems. However, they use radiation and the flow of air to work better than space heaters. They are also safer to use than space heaters as well.
Hot water baseboard heaters are also known as hydronic baseboard heaters. You can also purchase hydronic electric baseboard heaters as well. These use central heating units to help power them. However, they work when the water goes through pipes to each individual unit in the room.
These are more energy-efficient than electric baseboard heaters. These heaters are also more efficient than most central heat systems as well. The hydronic heating works best with radiant heating systems. This is where you have the piping underneath your floor. However, with many homes, this is not practical because of the floor’s structure. These are a great option if you are not looking to spend a fortune on installation prices.
How do Baseboard Heaters Work?
Electric Baseboard Heaters
These units use electric resistance to make their own heating through the baseboard. There are cables located inside the unit that helps heat the air and push out warm air. During the process of pushing heat out, cold air enters the bottom of your baseboard heater to be warmed.
Electric baseboard heaters use thermostats that are installed in every room. When the air in the unit is the temperature on the thermostat, the unit shuts off automatically until the temperature drops below your desires. This means that rooms can heat individually to the room owner’s preference. This is done by adjusting the thermostat. You should not turn your unit off because this may cause the pipes to freeze and therefore crack.
Hot Water Baseboard Heaters
This unit uses hot water. A boiler will heat the water and then transfer it from the pipes to the heater. If you have more than one heater this boiler will send hot water to each unit. This works because each unit only requires a small amount of water and then when it gets the water that it needs, it will run the water to the next unit. If you are not careful with installation, the further your unit is away from the water source, the less heat it will provide.
To help ensure all heat is equal, install a valve for flow control. This means that the units that are closer to the boiler use less water to make sure all heating units are the same. This also helps you use less water and helps provide stabilization. Plus, it conserves heat for all the units to have the proper heating elements. You can also adjust the valves to ensure that smaller rooms are not receiving as much heat as a larger room would.
Preserving Décor with Baseboard Heaters
Baseboard heaters take up space in a room. This is not going to be able to be avoided. This is the only disadvantage of this type of heating. However, these units can be painted to match your room. You should never try to hide your baseboard heaters under curtains or in other areas. This can create a fire hazard and cause the heater to run badly. It restricts airflow to the unit. There are specific covers that you can purchase to help hide the units and provide a more aesthetic look. Do not add homemade or other types of covers as these can be a fire hazard.
How to Properly Use a Baseboard Heater/Troubleshooting Options
If you properly use a baseboard heater, it can help you reduce your monthly bills. Baseboard heaters are popular systems and as stated, can be run from two different sources. If you install your heaters properly, there should be no issues. However, if you do run into issues, there are a few things that you can do to help improve your baseboard heater. We are going to cover a few different things to ensure that your baseboard heater is properly being used and properly installed.
1. Tighten Wires
The first thing that could be the problem is loose wires. Loose wires can cause the operation to be faulty. You should check and make sure that all wires in the system and those that connect to the unit are all tight and secure. You should ensure that your thermostat wiring is always wrapped under the set screws in a clockwise direction.
2. Check Your Voltage
If you are not seeing results by tightening the wires, you should turn your heater off. Make sure that the heater is also unplugged. You should check the voltage going to your baseboard heater with a voltage meter. This can be a hand-held unit. Some older homes may have poo standards or older insulation. You may need to increase your voltage level for the unit to be fully functional and operational. Low voltage will mean that you are not getting enough power to operate the machine. If you need to you can contact the electric company to change your service to a higher grid.
3. Remove Obstructions
You should first check the flooring nearest the baseboard. If it is loose or bunching up underneath the unit, you need to remove the nails and any metal that attaches the device. You should tighten your flooring or carpet to make sure that it will lay flat on the floor. It should not be bunched under the unit as this can cause faulty air-flow. Make sure that you are pulling drapes away from the heater. There should be nothing obstructing the heater. You also do not want any furniture in front of the heater because the performance level will drop tremendously. You should have the vent open and it should have free airflow at all times.
4. Damper Check the Unit
If your unit is not working properly after doing all the above steps, damper check your unit. There is a damper handle on your unit. This unit should be parallel. If it is not parallel the heater will not work properly. The handle should be parallel to the damper duct on the unit. If there is a twist-styled damper, you should make sure that it is on and set at the proper temperature to provide you with the best heat.
5. Vacuum the Coils
For this step, you should make sure that you are removing the cover of the heater. You can use either a vacuum with a hose or a handheld vacuum. You should run the hose or the vacuum over the coils to remove any debris or dust build-up. This should be done regularly to ensure that your unit is running properly. This also helps you avoid fire hazards.
Tips to Remember
• Coils are easily damaged. The fins are a very thin metal that will connect to the heating properties and help warm the air surrounding them.
• Coils need to be flat and straight to work properly. When you maintain and clean your coils, make sure that if you bend any of these fins, realign them.
• There is a fin comb that can be used on your combs to provide you with an air conditioning unit through your baseboard heating unit.
• You should not burn candles near or on top of the baseboard heater or cover.
• Do not use cleaning spray or supplies that leave a residue.
• Do not allow residue to collect on the coils, it could damage the coils.
• Do not use excessive amounts of cleaning solutions near the vent.
• Check for grime when you maintain the coils. Make sure to vacuum any remaining grime left on the coils.
Where did Baseboard Heaters Originate?
Baseboard heaters were used in older homes. This is why so many older homes have a baseboard heating system. Baseboard heaters were the best way to heat a home and the most affordable way to heat their home. It was also simple for everyone to use. Not to mention, they were good for homes that did not have ductwork or a way to install ductwork.
Today, most homes use a furnace that will blow the heated air through multiple tubes. These tubes are known as ductwork. The ductwork is connected to vents inside and throughout the whole home. This is the fastest and most efficient way to keep a home warm. However, in order for you to have these pipes and ductwork, you must have space under your floors and between your walls. Not all homes have this space.
In homes that were built before 1960, the ways would likely have been built with lath and plaster. This is costly and difficult to navigate compared to most homes today. Most homes now use drywall. Not to mention, plaster that is old cracks very easily and there is a lot of mess when you cut into it. When you cut into plaster, there is a lot of dust which can make for a large mess. This is why in older homes; it is more practical to use baseboard heaters.
As stated, there are two different types of heaters and there are both pros and cons to each one.
Pros/Cons of Electric Keyboards
Electric baseboard heaters are good because they heat up very quickly. They also do not require any central systems in the home to be used. They are also convenient because they are hardwired into the pour source of your home. Some of them also plug right into an outlet which means they can be used as a portable heater. The way the heater works is that the thermostat can be run on its own thermostat or you can wire it to a thermostat in the home.
Electric baseboard heaters are very inefficient. That is the main drawback of electric heaters. Most of the time, electric heaters are paired with central systems so they are not running constantly.
Electric heaters are sometimes oil filled baseboard heaters. You will only find oil-filled electric heaters. You will not find a hot water baseboard heater that is oil-filled.
Pros/Cons of Hot Water Baseboard Heaters
These systems use hot water as stated before to bring water from the homeowner’s basement to the heaters. These are also known as convectors. The benefits of hot water baseboard heaters are that they use small pipes compared to an air duct. They provide as much heat with a smaller pipe as an air-filled duct. Not to mention, it will fit easier between the walls. This is especially true with walls that have joists in the floor and studs in the wall. This makes it better for older homes to have it installed.
Just like an electric heater, this is a convective heating system. It will draw air the same as an electric heater. However, hot water heating systems are more efficient. This is because the water takes longer to cool and this allows more rooms to be heated at one time with one system.
However, with all those benefits, there is a downside. Hydronic baseboard heaters are expensive to install. This unit also takes longer to become warm as well. Most of the hydronic systems were installed while a home was being built. Most units that were installed in homes are still being used to this date. It is expensive to install because the boiler and copper tubing is expensive. However, it is more energy efficient in the long run. You will not find a hydronic baseboard heating system in a modern or newer home. If a home is built and they don to want to use forced-air, they will use the electric baseboards.
If you do not need to heat a large room, you should use a space heater. Space heaters are going to be the best option to heat smaller rooms. These units are more temporary and cheaper. They can be plugged into an outlet and removed when you are not using them. These do not require any type of maintenance and are not very expensive if you do not need a permanent solution. If you need a more permanent solution you should install baseboard heating systems.
How to Remove Baseboard Heaters
These units are also known as radiant baseboard units. These are generally fixtures made of metal that are found on the base of a wall. They contain many electrical components to provide your home with heat. They have been used in older homes and are no longer very popular. If your home has this type of heating unit, you may be wanting to remove them or update your home in general. Most of the units are very outdated and do not have the sensors that modern homes use to monitor temperatures. Not to mention, baseboard heaters are more expensive than the newer heat source options today. You do not have to hire a professional to remove your baseboard heating system. If you would like to do it on your own, there are a few steps you must take in order to do the job correctly.
You will want to turn your power off in the home or if you can just the baseboard heating systems. You likely have a certain breaker or circuit in your home that is specifically for your baseboard heaters. Make sure the switch is in the off section. Do not start anything else before the breaker is off. This could cause electrical shock if you are not turning the system off.
Next, you want to unscrew the retaining screws located in the heating system. You will want to use a screwdriver but if you have a drill you can use that as well. A drill with screwdriver heads will make the process easier and faster but you do not have to use a drill to do this.
The heater should now be loose. You should be able to pull it away from the wall. Your heater may have been secured with either paint or caulking. If this is the case, you will want to grab a utility knife. Use this knife to cut away the caulk or paint to make sure that you are not tearing your drywall. You do not want to have to repair your drywall.
You will not be able to pull the box entirely off the wall. There will be wires that are connected to the wall. This wiring was used to provide heat and the thermostat to the home. You will want to find a wire cutter and cut the wires. You want to make sure that you are cutting the wires close to the baseboard heater. You want to them cut as close as possible. The longer parts of the wire should be hanging from the wall. You want to purchase screw wire nuts. Once the wires are cut, place these wire nuts on the end of the wire to prevent electrical shock and fire hazards.
When you maintain and properly use a baseboard heating system, they can be perfectly fine. Just because we do not use them as often as other means today, does not mean they are not a good heating system. However, you need to make sure that you are properly maintaining and keeping them clean. You want to avoid all fire hazards and other potentially dangerous issues.
To better understand the safety guidelines, you need to know that the most basic baseboard heater has two parts. The thermostat and the heating element. These do not use fan-assisted heating processes. Baseboard heaters make heat as the electric goes through the unit itself. These heaters are placed against walls or are put in the baseboards of a room. These heaters are generally no bigger than ten inches tall and can range in length deepening on what you need for your room.
Most of the time, these heating units are safe. In fact, fire dangers are low with these units too. However, if they are not used properly, there is a greater risk of fire. Below we are going to discuss some of the proper maintenance tips as well as some safety tips. These tips help provide better heating and preventing fire.
1. Do Not Block Air Flow
The baseboard heater will heat up as the colder air is drawn through the heater. There are coils inside this heater that help warm the air. Once the air is warm, it will rise to the top of the heater and go into the room. The cycle repeats over and over.
In order for the heater to keep repeating the cycle, they need to be properly functioning. To make this happen, you should not block the airflow to your system. There should be nothing in front of the heater. You should keep the heater free of anything. This includes drapes and curtains. There should be nothing within six inches of your heater. This makes sure that your heater has optimal air intake.
2. Preventing Fire
When you place items close to your heater, it is going to block the airflow and create fire hazards. If the objects are flammable at all, this could cause serious problems. Furniture is extremely flammable and with enough heat, it could cause a fire. It is also important to make sure that your curtains or drapes are not near the heater. They should not touch the heater. Curtains and drapes are the most flammable.
3. Thermostat Control
Your heaters should have only one thermostat. Even if you have many different heaters in the same room, they should all be on the dame unit. It is safest to rely on one thermostat versus many of them. Many people tend to use different thermostats because they go on and off at slightly different temperatures. One thermostat will control the heat better and be safer than using multiples. If you use multiple thermostats, it can cause them to turn on and off irregularly and not work properly.
4. Thermostat Settings
Unlike air-flow heaters, the baseboard type heaters take longer to heat a single area. This may lead you to want to turn up your thermostat higher to heat the room quicker. However, this does not heat the room faster. It is just being inefficient and impatient. Not to mention, it is just an illusion and it does not work. It is safer to set your thermostat and wait for the room to heat up than to crank the heat up to heat it faster.
5. Preach Safety and Caution with Children
Baseboard heaters can be a danger to children. You must teach them to stay away from these heaters because if they touch them it could cause them to get burnt. Some of the heating elements in the heater can become extremely hot and cause burns to the skin if children are not careful. You should also make sure that children are not playing near the heater either.
Never keep toys close to these heating systems. The toys can be a fire hazard and they can end up in the heater. If toys end up in the heater a child may want to get them out and burn themselves. Not only could they burn themselves, but toys in the heater are also an extreme fire hazard.
If your children are older, teach them about being safe and how the heaters work. You want them to know why they could get burnt. Be sure to educate the children on the dangers of the heaters and how to be safe when they are near these heaters.
6. Occasionally Vacuum
As you know, everything collects dust. However, this does not mean it could necessarily be a safety issue. With that being said, you should still clean the heaters once in a while. The coils can collect dust and debris. You may notice that when you turn your heater on it smells burnt. This is from dust burning on the coils. If this happens, make sure you use a vacuum and clean the coils. If you vacuum and still notice grime or debris, wipe down the coils. Make sure that the unit is off while you are cleaning it to avoid any possible dangers. Read more reviews on thermostats, heaters, and coolers at the Home Climate Center.
Baseboard heaters are a great invention and are great for people looking for a little extra heat in the cooler months. However, they can be dangerous if they are not used properly. When purchasing a baseboard heater, make sure you know which brands are best and what to expect from each one.
The ones in this article are the best baseboard heaters on the market. You also want to make sure that you are wiring them properly and installing them properly. While many homes do not use this type of heating anymore, it is still a great alternative to modern heating.